Finishes Create Perfection with a Beautiful DuROCK Stucco Finish.

TROWEL FINISHES


DuROCK Trowel Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours. DuROCK Trowel Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultra-violet resistant finishes consisting of granulated quartz or marble, pigment, resin and other additives specially formulated for both exterior and interior use. DuROCK Trowel Finishes are ideally suited for both new and/or retrofit construction. DuROCK Trowel Finishes are available in several textures distinguished by their aggregate size and application technique. Coarse Coat, Desert Sand, Grain, Marble Coat, Max Coat, Pebble Rock, Sand Coat, Spacco, and Venetian finishes are trowel-applied coatings designed for use over wall and ceiling areas. Fine Coat and Pebble Coat finishes are trowel-applied coatings designed for use over details such as cornice, quoins, columns, etc.

SPRAY FINISHES


DuROCK Spray Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours. DuROCK Spray Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of silica sand, pigment, resin and other additives formulated for both exterior and interior use. DuROCK Spray Finishes are ideally suited for both new and/or retrofit construction. Whereas Pebble Spray and Fine Spray are intended for details only, the remaining DuROCK Spray Finishes are designed for use over wall and ceiling areas.

PLUS FINISHES


DuROCK Plus Finishes are formulated with 100% acrylic emulsions designed especially for use in elastomeric wall coatings, providing outstanding exterior durability, as well as excellent elasticity and elongation properties that are required to bridge continually over cracks without wrinkling. Due to the low glass-transition temperature, these finishes are able to maintain flexibility across a broad range of temperatures.DuROCK Plus Finishes can be color-tinted, and are intended for application on vertical wall surfaces. These finishes are most effective when applied over rigid substrates (such as cement plasters and concrete), and can also be used with DuROCK EIFS and Exterior Finishing Systems. DuROCK Plus Finishes are formulated to have excellent dirt-pick-up resistance, and superior water resistance as well as resistance to chalking. The dirt pick-up resistant chemistry of DuROCK Plus Finishes enables the coating to maintain its attractive appearance, while providing superior resistance to the effects of acid rain, pollution and ultra-violet light. Water beads on the surface thereby washing away the dirt. DuROCK Plus Finishes are permeable to water vapour, which permits open vapour diffusion through wall assemblies.

ROLLER FINISHES


DuROCK Roller Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours. DuROCK Roller Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of fine fillers, pigment, resin and other additives formulated for both exterior and interior use. DuROCK Roller Finishes are ideally suited for both new and/or retrofit construction. Roll On (small aggregate), Roll On Coarse (large aggregate) and Airless (no aggregate) are intended for use on decorative mouldings and a variety of wall surfaces.