Components The Finest Quality EIFS Products in the Industry.

Fibreglass Mesh


Mesh for DuROCK Exterior Insulation Finish Systems is made of alkali-resistant fibreglass. All mesh is made by a DuROCK-approved manufacturer, with DuROCK's logo plainly visible on the 5 ounce and high-impact reinforcing mesh products.

EPS Board


Expanded Polystyrene (EPS) insulation board for DuROCK Exterior Insulation Finish Systems is made of 100% virgin polystyrene resin, aged and cut in accordance with the requirements of ASTM E2430, and compliant with ULC-S701. EPS insulation board is made by a DuROCK-approved manufacturer, and is packaged in bags with DuROCK's logo plainly visible. Please refer to EIF System specifications for applicable thicknesses & sheet size.

Uni-Track


DuROCK's patented Uni-Track is a PolyVinyl Chloride (PVC) extrusion designed to be used at horizontal terminations and at horizontal joints where DuROCK Exterior Insulation Finish Systems are expected to drain. Its one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Uni-Track is three inches (76 mm) high, one inch (25 mm) wide, and eight feet (2.44 m) long. It is white in colour, but can be painted with most exterior latex paints.

Uni-Flash


DuROCK's patented Drainage Flash is a PolyVinyl Chloride (PVC) extrusion designed to be used at window head locations where DuROCK Exterior Insulation Finish Systems are expected to drain. It's one- size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Drainage Flash is eight feet (2.44 m) long and is available in 1 inch (46 mm) and 2 inch ( 52 mm) widths. It is white in colour, but can be painted with most exterior latex paints.

SOPRAGRIP - EIFS TAPE


SOPRAGRIP F is a self-adhesive membrane composed of SBS modi!ed bitumen and a non-woven polyester exposed reinforcement. The self-adhesive side is protected by a silicone release !lm. The non-woven polyester top surface provide good adhesion properties for liquid applied air/vapour barrier and exterior !nishing coating. SOPRAGRIP F is used as a cover strip over COLPHENE ICF membranes top termination. It is also used as reinforcement over gypsum or concrete board joints before installation of a liquid air/vapour barrier membrane.